View previous topic :: View next topic |
Author |
Message |
srikakulapu
Joined: 01 May 2006 Posts: 2
|
Posted: Mon May 01, 2006 12:36 pm Post subject: playback.fld works in test but not in fapp |
|
|
I have playback.fld that works fine in test, it loads over 100+ rows in test. However, it only loads 5 rows in production. Any suggestions as to why?
Thanks |
|
Back to top |
|
|
David
Joined: 15 Nov 2005 Posts: 97 Location: Near Heathrow Airport, London
|
Posted: Wed May 03, 2006 6:01 pm Post subject: |
|
|
Are you using the same PC to load into both environments, or are you using one machine to load into TEST and another to load into FAPP?
The reason for asking is that the free Classic version of DataLoad will allow you to load only 5 records, so that you can see how it works. If you like it, you buy a licence and install the regkey.dat and supply your serial number. If you have done this process on the machine that you are using for TEST, then you can load an unlimited number of records. If you are using a different machine for FAPP, you will be limited to 5 records.
HTH
David _________________ When my time comes,
I want to die like my grandfather did:
quietly and in his sleep.
Not kicking and screaming like the passengers in his car.
David K. Dickson
DataLoad Forum Moderator |
|
Back to top |
|
|
DataLoad Site Admin
Joined: 15 Nov 2005 Posts: 231 Location: Dorset, UK
|
Posted: Thu May 11, 2006 7:06 pm Post subject: |
|
|
Try re-recording your load in production and using that as the basis for your load. Sometimes differences between environments mean a load that works in one environment doesn't work in another, regardless of the fact that you think they are identical.
Regards,
Jonathan _________________ DataLoad Support Team |
|
Back to top |
|
|
|